Creat membership Creat membership
Sign in

Forgot password?

Confirm
  • Forgot password?
    Sign Up
  • Confirm
    Sign In
Creat membership Creat membership
Sign in

Forgot password?

Confirm
  • Forgot password?
    Sign Up
  • Confirm
    Sign In
Collection
For ¥0.57 per day, unlimited downloads CREATE MEMBERSHIP Download

toTop

If you have any feedback, Please follow the official account to submit feedback.

Turn on your phone and scan

home > search >

Optimization of drying process for PB1121 variety of paddy

Author:
S.K. Jha  N. Patel  S.K. Jagan  R.K. Pal  C. Kaur and J.P. Sinha  


Journal:
Quality Assurance and Safety of Crops & Foods


Issue Date:
2012


Abstract(summary):

Rough rice is typically harvested at moisture contents ranging from 20% to 24%, and subsequently dried to approximately 12% for safe long-term storage and milling. Harvesting paddy at high moisture content normally results in high yields and less damage and prevents field losses due to dropping and shattering. Drying of grains creates moisture and temperature gradient within the kernel resulting in the development of tensile stresses at the surface and compressive stress at the interior of the rice kernel. These stresses may result in kernel fissuring and subsequent breakage during milling. Thus, drying is considered to be one of the most critical operations in post-harvest processing of paddy which has great influence on milling yield. Basmati rice possesses unique cooking, eating and digestive qualities. India accounts for more than 70% of the world basmati rice production. Among basmati, PB1121 is widely grown in India and contributes a major share of rice exports from the country. Therefore drying of PB1121 was carried out with the objective to optimize the drying variables for minimum drying time and maximum head yield. Drying was carried out in 2-passes using a cross-flow dryer. The drying experiment in thin layer was conducted as per a central composite rotatable design in response surface methodology with 3 factors (drying air temperature, tempering time and moisture reduction in first drying pass) at 5 levels. The variables chosen for the experiment were drying air temperature (40–70 °C), tempering time (60–240 min) and moisture reduction percentage (3–10%) in the first pass of drying. Optimization of drying variables was done through the use of a desirability function by combining all responses into one measurement. The desirability functions were minimum drying time, maximum brown rice yield and head rice yield. Total drying time ranged from 35 to 132 min in two stages of drying, while in continuous drying it varied from 41 to 204 min. Head rice yield ranged from 39.77 to 71.56%. Optimum conditions for drying of paddy grains were found to be temperature of 58.3 °C, 7.13% moisture reduction and 148 min tempering time. At optimized conditions, total drying time and head rice yield were calculated at 53.1 min and 54.53%, respectively.


Page:
142


VIEW PDF

The preview is over

If you wish to continue, please create your membership or download this.

Create Membership

Similar Literature

Submit Feedback

This function is a member function, members do not limit the number of downloads